|
From larger families and waterways to smaller tow vehicles, the ADX200 is handcrafted to set itself apart on and off the water. Built on a 20’2” advanced aluminum hull design, this ultra-versatile, 250-rated machine is loaded with comfort, convenience, performance, and room. The deep-sided V2 model includes a huge 98-inch beam, step pad hull, blink-of-an-eye hole shot, and integrated spray rails to reinforce the dry ride. Forty-two gallons of fuel capacity center the layout. By longitudinally positioning the tank under the floor, the ADX200 enjoys an even smoother ride, greater stability, more responsive handling, and big water confidence that’s notably nimble in the shallows. Likewise, the interior layout of this rig is full of favored features. The workstation at the bow is fitted with a recessed trolling motor pedal tray as well as lure and tool holders, integrated NAV lights, remote switching, and your choice of electronics. The beam-forward engineering creates a world of deck space plus plenty of rod and gear storage. An aerated and insulated baitwell is positioned just in front of the driver’s console and is equipped with a filter screen and standpipe fittings. The center rod box is trimmed with a rod handle hold-down, dual lid shocks, space for sticks up to 8’ in length, and a lower center slot made for a ski tow pylon. Balancing both sides of the center compartment is a pair of locking storages. Each is equipped with painted undersides to the lids and our exclusive Dri-Max™ water evacuation system which includes lids with compression latches, raised lips, a rubber trim seal, and deep drainage channels. Also up front, there’s room for 6 ½’ rods tucked alongside the starboard side of the deck. The automotive-style windshield is mounted to our exclusive Firm-Set™ Pillars to help keep the frame secure and stable. Inside the cockpit, the layout is wide open. Even your bare feet will enjoy the cushioned comfort of high-density polyethylene flooring. It’s an incredibly durable, skid-resistant surface that dries quickly and is easy to maintain. At the helm, the fiberglass console is sized for clear sight lines to the performance instrumentation while also providing extra storage on top of the dash. The driver station is geared for 10-inch, flush-mounted electronics or even larger units when bracket-mounted. Just to the right of the driver, a switch panel features controls for the livewell, baitwell, NAV lights, bilge pump, and interior lights. With a world of room under the consoles and cockpit seating that slides and swivels, there’s an abundance of space to stretch out. Beneath each console, another pair of storage trays are ideal for 3700-sized tackle boxes or even a place to toss away used line, snack wrappers, plastic bottles, and other litter. On the forward passenger side, not only does the walk-through windshield protect from wind and weather but there’s a large, locking glovebox and massive 11 ½’ rod box running alongside the port gunnel. Elsewhere in the cockpit, rear handrails are available and there’s even more storage and cup holders. Our tournament-engineered livewell centers the aft deck and includes filter screens, a splash guard, recirculating aeration, and a pump-out feature for optimum convenience. Surrounding the well, a pair of jump seats not only extend the rear deck when down but are insulated for even more storage. Plus, the starboard under-seat-side is plumbed for cooler needs. Just in front of the jump seats, a box in the floor makes it super easy to get to the trolling motor batteries and breakers. The crank battery, charger, plumbing and pumps are also a snap to reach in the rear hatch. At the stern, the rear power compartment is set up for quick access to pumps and plumbing as well as a multi-bank charger, circuit breakers, our Vexus® View 8-gauge inline harness, and the crank battery. Looking toward the transom, a master power switch is conveniently located just under the hinged cover for the boarding ladder. It’s a simple way to instantly confirm that the power is off. Bow to stern, the ADX200 enjoys wood-free construction, a remote drain plug switch, exterior charging port, pop-up tie cleats, air shocks on the rod boxes, a 6-inch engine setback, and upright, level closed cell foam flotation for added peace of mind and sound dampening. Cradling the 200 is a factory-fitted, matching trailer that’s equally full of features. Check out the reinforced 4-inch channel steel frame, Victor Shield™ protective coating, LED lighting, disc brakes on both axles, swing tongue, hybrid oil hubs, custom Vexus® branded aluminum wheels, fitted bunks, load guides, transom tie-downs, spare tire and wheel, multiple side steps, and an available bow step. Rounding out the ADX family of deep vee aluminum designs, the ADX200 is built to look, feel, run, and ride like glass. Combined with an available ski tow pole, marine stereo, and bimini top, this rig is made for what you’re catching, even if it’s just some sun and fun! |
Vexus® V2 TechnologyBy incorporating numerous design and manufacturing improvements, we’ve raised the bar in aluminum fishing boats—giving you more room, more strength, and more consistent performance on the water. From the computer-modeled lifting strakes to the integrated spray rails to the additional width at the bow, this next generation of Vexus® boats is ready to excel every time you back one down the ramp. |
Beam-Forward DesignThe Beam-Forward design of your ADX model works to maximize space, comfort, and convenience while also delivering an incredibly smooth, dry ride. With greater deadrise and a deeper hull, virtually every area of the boat benefits with more deck, floor, cockpit, and storage space. |
Hard Case™ Paint with Clearcoat ProtectionThis new-era, color armor is unrivaled; setting the highest standards for durability, shine, strength, and worry-free maintenance. Plus, it’s a hands-down winner in chemical, gas, scratch, impact, and even salt spray resistance tests. Bow to stern, this performance-proven process means your rig is built to turn heads on and off the water. |
Automotive-Style Windshield Mounted to Firm-Set™ PillarsWherever you go, water commands respect. It’s why you won’t find our automotive-style windshields mounted on flimsy consoles that can shift like sand. Instead, ADX windshields are tied directly to the deck superstructure. It’s a firm foundation allowing the windshield and frame to function as one unit. Ultimately, the entire design is built for superior strength and rigidity, helping everything stay secure, stable, and aligned. |
Vector Force™ Transom with Kicker Capability (up to 10hp)Our Vector Force™ transom is constructed of .125” aluminum and reinforced with more material than the industry standard. The transom is the very foundation of the boat structure and, at Vexus, we're focused on ensuring anglers can outfit their rig with today's setback plates and shallow water anchors. Many others don't offer these options and installing them may actually void their warranty. |
Bow Storage for Trolling Motor PedalThe extra bow panel compartment offers quick-stow and retrieval for the pedal of Power-Drive-style trolling motors. |
Integrated LED Nav LightsThe aerodynamic form of these integrated bow, navigation lights is not only geared to reinforce the sleek lines of your rig but the low-profile design means you’ll never worry with bumping or bending them in the dark. |
8’ Center Rod CompartmentThe huge, center rod box is equipped with large, oval tubes and a world of room for rods and gear. |
SeaStar™ Pro Hydraulic SteeringThe fluid feel of SeaStar™ Pro hydraulic steering reinforces the smooth ride and responsive handling of this deep vee design. |
Molded Fiberglass Jump Seats with Under-Seat StorageInsulated and weather-sealed, the extra, under-seat storage and Cold Spot™ cooler are even more examples of the extreme versatility built into this design. |
PERFORMANCE AND ENGINEERING
|
ADVANCED ELECTRONICS
|
COMFORT AND CONVENIENCE
|
HANDCRAFTED DETAILS
|
TRAILER FEATURES
|
CAPACITIES AND SPECIFICATIONS
|